- Added CFG_ALLOWED_KEY struct with binary key storage (64 bytes) for fast memcmp comparison
- Implemented parsing of [allowed_keys] section with allow_all flag and per-key entries
- Added key validation in etcp_connections.c server handler (errorcode=8 for rejected keys)
- Default behavior: deny all if [allowed_keys] section is missing or allow_all=0 with no keys
- Added proper memory cleanup and debug logging for allowed_keys configuration
- Updated all test configs to include [allowed_keys] allow_all=1 for backward compatibility
When peer's random session_id changes, etcp_conn_reinit() is called.
Previously NAT check status was not reset, so route_bgp_new_conn()
skipped NAT re-detection because nat_check_status was still
NAT_CHECK_IN_PROGRESS from the previous session.
Now etcp_conn_reinit():
- Cancels pending NAT-ping requests via route_ping_cancel_for_conn()
- Resets nat_type and nat_check_status to UNKNOWN/NONE for all links
This ensures NAT type is re-detected for all links after reinit.
- route_bgp_send_nat_info: moved ip_to_str(pkt->nat_ip) log before etcp_send
- route_bgp_send_nat_check_req: moved ip_to_str(pkt->interface_ip) log before etcp_send
Both were reading from pkt memory that could be freed by etcp_send callback.
req_pkt memory could be freed by etcp_send callback before pending->request_id
was assigned. Store request_id in local variable and use it for pending.
- Changed request_id from uint64_t to uint32_t in BGP_PING_REQUEST/RESPONSE
- Added uint16_t reserved field after subcmd for proper alignment
- Updated next_ping_req_id from uint64_t to uint32_t in ROUTE_BGP
- Fixed all log format strings from %016llx to %08x
- All 26 tests passing
- Added 32-bit session_id to ETCP_CONN struct (random per client)
- Session_id transmitted in INIT_REQUEST/RESPONSE after node_id
- Server: skip reinit if session_id matches existing connection
- Server: send INIT_RESPONSE (0x03) only when reinit actually done
- Server: send INIT_RESPONSE_NOINIT (0x05) for same session
- Client: ignore INIT_RESPONSE with wrong session_id
- Fixed tx_state initialization in etcp_conn_ready for noinit case
- All 26 tests passing
1. Добавлен via_conn в struct route_ping_pending - отслеживает через
какое соединение (third_conn) отправлен запрос на ping
2. route_ping_cancel_for_conn теперь отменяет pending при падении ЛЮБОГО
из двух conn: владельца линка (link->etcp) ИЛИ third_conn (via_conn)
3. nat_link_check_cb проверяет link->nat_check_status == IN_PROGRESS
перед обработкой - защита от race condition когда conn упал раньше
чем пришел ответ
4. Убраны избыточные DEBUG-логи, оставлены только информативные
- Исправлена критическая ошибка: использовалось na->link->conn вместо
na->link->etcp (struct ETCP_LINK.conn = ETCP_SOCKET*, а .etcp = ETCP_CONN*)
- Добавлен подробный дебаг в 4 места:
* route_ping_send_req_addr - при создании pending
* route_ping_cancel_for_conn - при поиске и отмене
* route_bgp_remove_conn - состояние линков перед отменой
* etcp_connection_close - очистка линков при закрытии
- route_bgp_remove_conn теперь отменяет pending NAT checks перед удалением
- Добавлена route_ping_cancel_for_conn: ищет pending запросы для conn,
отменяет таймеры, сбрасывает arg->link = NULL, удаляет из списка
- struct nat_check_arg вынесена в route_bgp.h для видимости из route_ping.c
- После отмены pending, статусы линков с NAT_CHECK_IN_PROGRESS сбрасываются в NONE
- etcp_connections.c: парсинг NAT IP через memcpy (сохраняет NBO)
- route_bgp.c: убраны ntohl() для IP в NAT detection и route_bgp_send_nat_info
- route_ping.c: убран htonl() для IP в ping request
- тесты: обновлены ожидания NBO для nat_ip
- platform_compat: get_interface_ip_by_index() для получения IP по ifindex
- ETCP_SOCKET: interface_addr заполняется из конфига/interface/default route
- BGP_NAT_CHECK_REQ: добавлены interface_ip/interface_port (network byte order)
- route_bgp_send_nat_check_req: отправляет interface_addr линка
- route_bgp_handle_nat_check_req: принимает interface данные в sockaddr-заглушку
- Add rx_dup_count (local) and tx_dup_count (remote via ACK) to ETCP_CONN
- Extend ACK section format: add 16-bit rx_dup_count after last_delivered_id
- Reconstruct 32-bit tx_dup_count from received 16-bit diff
- Update etcpmon protocol and control_server to expose counters
- Update packet dumper for new ACK format
- utun_update.sh: Shell script for updating single instance
* fast mode: git pull + make clean + make
* full mode: complete rebuild with autotools
* Auto-detects project root from script location
* Handles PID-based process stop/start
* Supports Linux and BSD (nproc/sysctl)
* Returns proper exit codes (0-4)
- mass_update.py: Python script for parallel SSH updates
* Parallel execution via ThreadPoolExecutor
* Configurable via JSON (~/.utun_servers.json)
* Supports custom port/user per server
* Timeout and error handling
* Summary output per server
Tools for remote mass deployment of uTun updates via SSH.
- Add timeout_heap_get_size() to get active timer count
- Add global counters in memory_pool: g_total_free and g_total_allocated
- Simplify busy memory calculation to single formula:
busy = memory_pool_get_total_allocated() - memory_pool_get_total_free_blocks()
- Add new IDC_EDIT_ACTIVE_TIMEOUTS and IDC_EDIT_BUSY_MEMORY to GUI
Evgeny