- Создан src/chat/ с chat_event.h/c — система нотификаций
- Перенесены chat_core, chat_msg, chat_channel, chat_profile, chat_status
- Перенесены chat_sync, member_sync, merkle_sync, db_sync
- gui_bridge_post() заменён на chat_event_post() с возможностью регистрации обработчика
- chat_event_set_handler() — chatgui регистрирует мост в gui_bridge
- Без обработчика: события логируются через DEBUG_DEBUG + log_dump
- chat интегрирован в utun_instance.c (при db_path в конфиге)
- Обновлены include-пути, Makefile.am, CMakeLists.txt
- Из chatgui удалены старые transport/ файлы, обновлён utun_node.cpp
- si_send_data_batch: неправильный SQL SELECT с несуществующей колонкой author
вместо node_id → ломал всю передачу данных в REFINE/SEND_DATA
- Добавлена проверка si_prep и возврат int с кодом ошибки
- Все вызовы si_send_data_batch проверяют возврат, при ошибке сброс sync_state
- db_handle_push: добавлен db_cascade_from после вставки (раньше chain_hash
не пересчитывался после PUSH)
- db_handle_refine: DEBUG_WARN при scnt==0 (fm за пределами диапазона)
- Добавлена публичная db_sync_chain_verify() для верификации цепочек
- test_db_sync: фаза 4 (divergence через разныe hashes + REFINE/SEND_DATA),
фаза 5 (PUSH без хвоста + cascade verification)
- Убран мёртвый код db_sync_on_new_conn
- chatgui: адаптивная раскраска пузырей исходящих сообщений
- conn_mgr_init(TOPO_GROUP* group) — работает внутри заданной группы
- conn_mgr_connect_node: загрузка узла из SQLite если нет в BGP-таблице
- topo_node_sqlite_node_load(): загрузка TOPO_NODE (ref=0) из БД
- cm_start_phase_direct: db_loaded-ветка — перебор всех адресов без NAT-фильтра
- cm_cleanup_db_node: удаление TOPO_NODEQ из группы при неудаче, только если нет путей
- cm_start_phase_indirect: исправлено зависание при best_candidates==0 (cm_deliver_result)
- conn_mgr_set_direct_timeout_ms(): конфигурируемый таймаут фазы DIRECT
- conn_mgr_destroy до etcp_router_destroy (исправлен порядок)
- test_conn_mgr: +2 сценария (DB-успех, DB-недоступен), проверка topo_group
- etcp_router: SVC_ROUTE_HDR (+8B), ETCP_ROUTER_CONN/TRANSIT_QUEUE хеши расширены под group_id
- Все caller'ы (proxy, routing, conn_mgr, nat, chatgui, tests) обновлены
- topo_group: глобальный реестр TOPO_NODE по node_id, ref_count=0 при создании
- BGP-обмен активируется для всех групп (а не только дефолтной)
- Протокол: group_id добавлен в WITHDRAW/TABLE_REQ/TABLE_COMPLETE/ERR_GROUP_MISMATCH
- Per-connection коллбэки заменены на instance-level conn_status
- msg_transport полностью удалён из проекта
57/57 тестов
- Remove is_dm column from channels table (dm detection by member count)
- Rename member name column to userinfo — extensible json_flat format
- Add json_flat.c/h library for compact JSON serialization
- Fix join_sig message format: use ch_x25519+ch_ed25519 instead of channel_id string
- Remove name from join_msg body (now in userinfo via json_flat)
- Update chat_core, chat_sync, member_sync, db_manager to new format
- Add topo_strategy.txt — архитектурные заметки по топологии
- mainwindow.cpp: swap setupMessaging() before setupNode() so g_receiver is created first
- gui_bridge_impl.cpp: add DEBUG_WARN when gui_bridge_post drops event due to NULL g_receiver
- Add sync_start_tb to SI_PEER, set in db_sync_initiate_sync
- peer_check_cb: after 15s timeout reset sync_state=0 with WARN
- db_handle_error: accept si, reset sync_state=0, DEBUG_ERROR with details
- DB_SYNC_SYNC_TIMEOUT=15 added to db_sync.h
Root cause: db_handle_init_resp marked sync_state=2 when my_dh==peer_dh
without checking that all my records fit in the confirmed prefix.
If mc > tp+1 (I have records beyond the common prefix), the tail was
never sent — lost records.
Fix:
- Remove special-case 'sc==0 && my_dh==peer_dh' (redundant, same bug)
- In general dh_match: if mc > tp+1, send remaining records [tp+1,mc-1]
using the same inline loop pattern as 'peer empty' branch
Test: 3 phases covering all dh_match paths:
- Phase 1: B empty+late instance → dh_match at tp=0 (sc=0) → tail-send 49
- Phase 2: A=80 B=50 → dh_match at tp=49 (sc>0, sparse) → tail-send 30
- Phase 3: fresh instances → peer empty → send all 30
Root cause: accept queue overflow (backlog=32) caused kernel SYN drops.
Children waited ~1s for SYN retransmit timeout (5 gaps × 1s = 5s out of 7.2s).
With backlog=1024 the timeout drops from ~7.2s to ~0.065s (110× faster).
Remove secondary level filtering in debug_output(). Now the only filter
is debug_should_output() (per-category + global fallback). Output goes
to file (if file_output set) or console (if console_enabled), with no
additional level check.
Removed:
- debug_set_console_level(), debug_set_file_level()
- console_level, file_level fields from debug_config_t
- debug_set_level() no longer sets console_level
- Renamed TOPO_BGP to TOPO_GROUP with topo_group_id (64bit)
- Added TOPO_GROUPS container (ll_queue group_list) in UTUN_INSTANCE
- Memory pools moved from TOPO_GROUP to TOPO_GROUPS (instance-level)
- Default group: TOPO_GROUP_UTUN = 0x8000000000000000
- topo_groups_get_default() searches by group_id, not just first entry
- All topo_bgp_* renamed to topo_group_*; function signatures updated
- Files: topo_bgp.h/c -> topo_group.h/c
- NODEINFO_MSG (protocol, packed): added flags byte + group_id field
- NODEINFO (memory): ref_count, linked list heads instead of inline arrays
- NODEINFO_ROUTES: separate struct with linked list subnet heads
- NODEINFO_Q: node*, routes*, tranzit_data*, hop_list* as separate mallocs
- 6 memory_pools in ROUTE_BGP for NI_* linked list items
- ni_list_count() universal counter via _ni_head cast
- nodeinfo_serialize/deserialize for protocol <-> memory conversion
- NODEINFO_FLAG_SEND_SUBNETS controls subnet data in protocol
- group_id defaults: utun=NODEINFO_GROUP_UTUN(1) with subnets
Fixes:
- deserialization: data+2 instead of data+sizeof(BGP_NODEINFO_PACKET)
- memset: start after ll_entry to preserve ll.size
- hop_src: subtract hop_count*8 to point at correct dynamic offset
- same-ver branch: remove_path(conn) instead of remove_path_by_hop(peer)
- double-free in route_bgp_remove_conn/process_withdraw
- conn_mgr_add_alien_node: rewritten for new structures
- all test files updated for new API
Root cause: 80kbps congestion causes 9+ second backpressure during push
phase. No packets reach server → keepalive timeout (2s default) fires
→ ETCP link down → BGP cleanup → etcp_router_conn_restart()
- frees send_q (up to 64 = ROUTER_MAX_SEND_Q_PACKETS lost)
- sends 9-byte restart notification to service handler (conn=NULL)
- resets seq to 0
Fixes:
1. Set keepalive_timeout=60000, keepalive_adaptive=0 in test configs
to prevent spurious timeouts during intentional congestion testing
2. Handle 9-byte restart notification in srv_handler:
when conn==NULL && len==9 → reset g_expected_seq=0 gracefully
- tcp_proxy_server: drain_cb uses etcp_router_on_send_ready instead of retry_timer
- socks_proxy: on_read_cb + tx_waiter_cb use etcp_router_on_send_ready instead of waiter_register
- Result: FIFO round-robin via ll_queue waiters on send_q, all streams get fair share
- No timers — wakeup is event-driven via queue_data_get → check_waiters
- TCP backpressure: read_queue callback_suspended prevents over-reading
process_http_request() теперь обрабатывает любые HTTP-методы:
- CONNECT — туннель как раньше, без изменений
- GET/POST/PUT/HEAD/OPTIONS/... — парсинг абсолютного URL, DNS,
send_connect + пересборка строки с относительным путём + тело DATA
test_socks_http_proxy: +3-й worker (http_proxy через -x без --proxytunnel),
+проверки POST (echo), HEAD (200 OK), OPTIONS (Allow). Все 78 проверок — PASS.
uasync: replace raw socket_node* handle with packed index — fixes UAF after socket_array realloc
tcp_io: defer u_free in tcp_conn_destroy via uasync_call_soon — prevents callback-chain UAF
tcp_io: guard read_cb/write_cb with NULL queue checks after deferred destroy
tcp_io: save read_queue to local before queue_data_put + NULL guard after
route_connectivity: linked-list probe_ctx — cancel all parallel probes before nq free
- etcp_connections: fix link leak & UAF in etcp_socket_remove — remove_link inside etcp_link_close shifts array, skip NULL set and i++
- stcp_server: fix UAF in stcp_conn_process_recv — defer free via uasync_call_soon after stcp_conn_do_close
- etcp: save pkt_len before queue_data_put to output_queue (callback may free entry synchronously)
- socks_proxy: add pool bounds check before memcpy, UINT16_MAX truncation guard, freed flag
- tcp_proxy_server: reorder cleanup (cancel waiters before tcp_conn_destroy), UINT16_MAX guard
- test_route6_lib: increase nodes[] array to STRESS_NODES + STRESS_OPS
Evgeny
jeka