Signal handler via g_shutdown + uasync_wakeup ensures clean uasync poll exit.
updateReadPosition() now saves both lastReadMsgId and lastPosMsgId on every
scroll stop (300ms debounce), not just when read position changes.
connect(stopped, quit) triggers graceful Qt shutdown after uasync cleanup.
QString::fromUtf8(ch_id) read past length-prefixed string, capturing garbage.
Use fromUtf8(ch_id, ch_id_len) — length already available from bridge but was unused.
Messages now appear on refresh and unread badge correctly matches channel.
Replace gui_bridge_post_uasync_fn (async queue lost on shutdown) with direct
chat_core_save_ui_state (sync SQLite write). SQLite WAL handles concurrent access.
Add DEBUG_DEBUG traces in closeEvent, ~MainWindow, aboutToQuit.
Add author_node_id:8 to GUI_EVT_MSG_RECEIVED data format.
Callback now includes uint64_t author parameter.
SoundManager::play('msg_incoming') only when author != myNodeId.
- Same-channel refresh: save scroll pos in memory, restore from memory (no DB race)
- Force m_readDebounce->start() after loadChannel (scrollToBottom may not trigger valueChanged)
- DEBUG_DEBUG logs in updateReadPosition, saveChannelState, onMessageReceived, setChannelUnreadCount
- Debounce timer (300ms) advances lastReadMsgId only when message is fully in viewport
- Unread badge no longer resets on channel select — only when actual scroll reads msgs
- saveChannelState() uses tracked m_lastReadMsgId instead of viewport bottom
- getChannels() reads lastReadMsgId from ui_state (was reading unused channels column)
file(GLOB) in libutun/CMakeLists.txt picked up mplay.c, mdb_dump.c and other
standalone LMDB tools that are not library code and fail on Windows. Filter them
out, keep only mdb.c + midl.c.
Store read/scroll positions per channel via ui_state table (key-value).
Draw red +N badge on channel list items for unread messages.
Fix getMessages() to fetch last N messages (was fetching first N).
chat_channel.c: new chat_core_create_channel_auto(name) — generates
X25519/Ed25519 keys, random channel_id, Ed25519 signature, creates channel.
chat_core_create_channel_auto_trampoline for gui_bridge_post_uasync_fn.
mainwindow.cpp: onCreateGroupRequested() reduced from 100 to 15 lines.
Removed openssl/evp.h and openssl/rand.h includes from UI code.
- selectionCommand: remove Current flag to avoid redundant
currentChanged emission during mouse press
- loadChannels: wrap clear+repopulate in blockSignals(true/false)
to prevent selectionChanged and currentChanged from firing
on intermediate model states
- selectChannel: use explicit selectionModel()->select() with
ClearAndSelect + setCurrentIndex with NoUpdate
- simplified selection restore: only track selectedCid by ID,
removed fallback-to-row logic
- channellist.cpp: selectionChanged guard now checks currentIndex().row()
is within model->rowCount() to avoid re-selecting stale index after
model clear, which caused both channels to stay blue when switching.
- chat_sync.c: cs_refresh_channels now posts CHANNEL_PEERS_ONLINE
for all channels after loading, fixing online count showing only
on the last connected group.
- chat_sync.c: after invite trampoline, check if connection to invite
node is already UP and trigger cs_on_conn_up to send CHANNEL_INFO_REQ.
Fixes invite not completing when connection is reused (Fix 1 side effect).
- mainwindow.cpp: use name.toUtf8().constData() instead of qPrintable()
to preserve UTF-8 encoding on Windows (Russian channel names).
- conn_mgr_connect_node: check instance->connections globally to reuse
existing ETCP_CONN across groups instead of creating a new one (DUP addr)
- cm_start_phase_direct: close dead connection when etcp_link_new fails
to prevent shadowing live connection in instance->connections hash
- cm_cleanup_db_node: remove redundant topo_node_registry_release
(already done inside topo_node_free_lists)
- db_verify_author_sig: show ed_pubkey and sig first bytes on failure
- SI_PEER: add sync_retry_count field
- db_handle_sync_done: limit re-initiate to 3 retries before giving up
- db_sync_initiate_sync / db_sync_on_conn_up: reset retry_count
- db_handle_init_sync: TRACE→INFO with peer_cnt/my_cnt/tp_offset
- db_handle_send_data: detailed batch info (range, remaining count)
- db_sync_initiate_sync: add table name to log
- db_sync_on_conn_up: add first table name to summary log
- chat_sync.c: move pending_invite clear from INFO_RESP to WELCOME,
post GUI_EVT_CONNECT_RESULT on invite success in cs_handle_welcome
- etcp_connections.c: NORM_DECRYPT_TRY/CRYPTO_DECRYPT_OK DEBUG_DEBUG->TRACE
- secure_channel.c: ENCRYPT/DECRYPT DEBUG_DEBUG->TRACE
chat_core_ensure_channel_ready() had a duplicate CREATE TABLE peers_*
with OLD schema (no node_RTT, node_type, connected). Since it was called
from 4 places WITHOUT topo_node_sqlite_channel_put() first, the old
schema was created first, and IF NOT EXISTS in the new DDL was a no-op.
Removed the entire old block. Only topo_node_sqlite_channel_put() now
creates peers_* tables with the full schema.
Also removed ORDER BY p.node_RTT from get_public_peers/get_local_peers —
ordering not needed for sequential connect attempts.
struct TOPO_NODE_REG_ENTRY имел node и ll.data[0] (гибкий массив) на одном смещении.
memcpy(re->ll.data, &node_id, 8) затирало re->node значением node_id,
из-за чего node_registry_find возвращал не указатель а битый node_id → SIGSEGV.
Убрал struct TOPO_NODE_REG_ENTRY, перешёл на явные смещения:
data[0..7]=ключ, data[8..15]=указатель, queue_entry_new(16).
Добавлено:
- conn_mgr_connect_from_invite() — подключение к новому узлу по invite-данным
(INIT → INVITE_INFO_REQ/RESP → проверка членства в группе → сохранение в БД)
- topo_group_connect.c — авто-подключение при старте CHAT-группы:
Phase 1: одновременный connect всех connected=1 пиров, таймаут, отмена незавершённых
Phase 2: последовательный перебор публичных адресов до первого успеха
- Счётчик active_conn_count с проверкой nodeinfo-путей (UP/DOWN)
- restart() при phase=DONE и count==0
БД:
- connected INTEGER NOT NULL DEFAULT 0 в peers_<ch> + ALTER TABLE для существующих
- topo_node_sqlite_set_connected / get_connected_peers / get_public_peers
Chatgui:
- Включён topo_group (убран utun_instance_set_topo_group_enabled(0))
- Создание TOPO_GROUP_TYPE_CHAT при channel_ready и при старте
- Invite connect через conn_mgr_connect_from_invite
- Удалён chat_conn_mgr (из сборки) + весь старый auto-connect код
При разрыве ETCP-соединения модуль собирает каскадно отвалившиеся узлы:
- add_node из hop_list вычисляет next_hop относительно failed_peer,
группирует узлы в отдельные recovery-контексты (direct/indirect списки)
- start запускает асинхронный перебор для каждой группы параллельно
- is_next_hop-узел пробуется первым с приоритетом по мин. RTT
- таймаут 2с на попытку, conn_mgr_cancel_callback при отмене
- отмена: topo_group_new_conn (on_up) находит узел в любом ctx -> ctx целиком
- завершение: оба списка пусты -> освобождение ctx
- conn_mgr_init(TOPO_GROUP* group) — работает внутри заданной группы
- conn_mgr_connect_node: загрузка узла из SQLite если нет в BGP-таблице
- topo_node_sqlite_node_load(): загрузка TOPO_NODE (ref=0) из БД
- cm_start_phase_direct: db_loaded-ветка — перебор всех адресов без NAT-фильтра
- cm_cleanup_db_node: удаление TOPO_NODEQ из группы при неудаче, только если нет путей
- cm_start_phase_indirect: исправлено зависание при best_candidates==0 (cm_deliver_result)
- conn_mgr_set_direct_timeout_ms(): конфигурируемый таймаут фазы DIRECT
- conn_mgr_destroy до etcp_router_destroy (исправлен порядок)
- test_conn_mgr: +2 сценария (DB-успех, DB-недоступен), проверка topo_group
- etcp_router: SVC_ROUTE_HDR (+8B), ETCP_ROUTER_CONN/TRANSIT_QUEUE хеши расширены под group_id
- Все caller'ы (proxy, routing, conn_mgr, nat, chatgui, tests) обновлены
- topo_group: глобальный реестр TOPO_NODE по node_id, ref_count=0 при создании
- BGP-обмен активируется для всех групп (а не только дефолтной)
- Протокол: group_id добавлен в WITHDRAW/TABLE_REQ/TABLE_COMPLETE/ERR_GROUP_MISMATCH
- Per-connection коллбэки заменены на instance-level conn_status
- msg_transport полностью удалён из проекта
57/57 тестов
- topo_node_sqlite_member_put: remove joined_at column from INSERT (not in server schema, duplicates join_ts)
- chat_core: rename peers table column name→userinfo to match server schema + add ALTER TABLE migration
- chat_sync: remove 3 redundant INSERT INTO nodes that wrote raw JSON userinfo into nodes.name, overwriting correct plain name from topo_node_sqlite_node_update_verified
- config_updater.{h,cpp}: single implementation — config_update_in_lines
for batch updates + config_update_option for file-level. REPLACE/APPEND
modes, section auto-creation
- node_config.cpp: generateIdentity() now derives node_id via
SHA256(pubkey) (like sc_derive_node_id_from_pubkey) instead of random.
save() uses config_update_in_lines for line-level update when file
exists, saveFull() only for new file and addServer/addClient.
Removed duplicate findSectionBounds/updateOptionInSection/configUpdateOption
- test_config_updater.cpp: Q_ASSERT replaced with VERIFY macro — Q_ASSERT
in Release mode does not evaluate the expression, causing false positives.
Test now works in both Debug and Release
Evgeny