chat_sync_push: fix PUSH format to match cs_handle_push expectations
(was missing insert_record header: ts+dh+nid before ct+dlen+data)
Add DEBUG_INFO log with peer count after send.
on_db_sync_insert: call chat_sync_push after successful local insert
→ new messages are now pushed to all connected peers
Add DEBUG_ERROR to 4 silent returns (JSON parse fail, SQL errors)
chat_core_submit_message: add DEBUG_INFO entry log (ch, ct, len)
chat_core_insert_record: add DEBUG_WARN/ERROR to 7 silent returns
(truncated record, SQL prepare fail, unknown step error)
cs_handle_push: add DEBUG_INFO for ACK send, DEBUG_ERROR for insert fail
cs_handle_send_data: DEBUG_WARN when record truncated mid-loop
cs_on_conn_up: DEBUG_INFO sync path with channel count
Full trace now shows every message: SUBMIT → insert → PUSH → RECV PUSH → ACK
cs_on_conn_down: remove invite state zeroing on disconnection.
Only timeout callbacks and explicit protocol end (CS_MSG_ERROR,
transition to JOIN phase) clear the invite state.
Connection flap now causes automatic retry:
conn_up → pending_invite_ch_id != 0 && !info_req_timer → resend
CHANNEL_INFO_REQ. No deadlock possible.
- cs_handle_init_resp: change silent reject len<37→len<5 (actual payload
sent is 6 bytes, plen=5 after stripping type byte).
Support short format (synced, peer_count+sparse_count) and long format
(divergence, with test_pos+peer_ch). Add INFO logs at each decision.
(fixes sync never starting after invite join — RECV INIT_RESP len=5
was silently rejected)
- All 12 silent return branches in handlers: add DEBUG_WARN with
handler name, peer, ch_id, and reason (makes malformed packets
visible in logs)
- Key sync flow INFO logs:
cs_handle_init_sync: peer_count, my_count
cs_handle_send_data: records sent/received count
cs_on_conn_up: invite vs sync path
chat_core_insert_record: successful insert
- on_db_sync_insert: parse JSON {"n":...,"ct":...,"d":...}, store
d→data, n→node_id, ct→content_type with proper chain_hash
(fixes JSON displayed instead of message text)
- chat_core_cursor_open: SELECT chain_hash column
- chat_core_cursor_next: include chain_hash(32) in output record
- cs_handle_send_data: parse chain_hash in received records
(fixes chain_hash mismatch → all sync records were dropped)
- cs_handle_channel_join: post GUI_EVT_MEMBERS_CHANGED
(fixes creator not seeing new member after join)
- cs_handle_welcome: trigger INIT_SYNC with inviter after join
(fixes no message sync after invite join)
Remove secondary level filtering in debug_output(). Now the only filter
is debug_should_output() (per-category + global fallback). Output goes
to file (if file_output set) or console (if console_enabled), with no
additional level check.
Removed:
- debug_set_console_level(), debug_set_file_level()
- console_level, file_level fields from debug_config_t
- debug_set_level() no longer sets console_level
New category (id=25) replaces DEBUG_CATEGORY_DEBUG in chat_sync and
chat_core. This allows enabling only protocol-level logs (SEND/RECV,
timeouts, handshake) without the noise from DEBUG category.
Changes:
- debug_config.h: add CONNECTIVITY=25, COUNT→26
- debug_config.c: add 'connectivity' to g_debug_categories
- chat_sync.c: DEBUG→CONNECTIVITY in all protocol logs
- chat_core.c: DEBUG→CONNECTIVITY in connection/create logs
- utun_node.cpp: remove hardcoded DEBUG=TRACE (now config-driven)
- chatgui.cfg: connectivity=info in debug_categories
new_conn is only true for the first INIT after server restart.
Subsequent INITs from same peer (recovery loop) see new_conn=0
and revert to old logic, sending 0x05 (no reset) and overwriting
the first 0x03 response.
got_initial_pkt stays 0 until client actually sends seq=1, so
server keeps sending 0x03 across all INIT retries until client
resets and starts from seq=1.
When server restarts, new ETCP_CONN has session_id=0 (calloc).
If client sends INIT_REQUEST_NOINIT (0x04) with session_id=0,
the condition conn->session_id != session_id is false (both 0),
so no reset was sent. Client kept old seq numbers while server
expected seq=1, causing 'Waiting for initial packet' deadlock.
Fix: add || new_conn to the condition — when server created a
fresh connection (was restarted), always send reset to client.
Server now checks both code==ETCP_INIT_REQUEST and session_id mismatch
to decide send_reset. Previously only session_id was checked, so if
session matched (both sides had 00000000), reinit was skipped even
when client explicitly requested reset (code 0x02).
Client side already correct: handle_init_response_client:1473 calls
etcp_conn_reinit if pkt_code==ETCP_INIT_RESPONSE (0x03).
- 1133: DEBUG_DEBUG -> DEBUG_INFO for TX DATA (seq, len, retry, queue lengths)
- 1437: add DEBUG_INFO when initial packet seq=1 accepted
These two INFO lines show the exact order of first sends and receives
to diagnose INIT sequencer sync without guessing.
- 1556: Normal decryption failed -> DEBUG_DEBUG (expected for INIT, no more spam)
- 1581: added 'INIT X25519 OK from %s' with source address
- 1604-1617: INFO log for decrypted packet type (PING/PONG/INIT) with peer_id+src
- 1662-1668: expanded INIT accepted log with all fields:
peer_id, mtu, link_id, socket_id, type, only_local, src_ip:src_port,
session_id, actual src (UDP) — shows NAT mismatch
Without sc_init_ctx, crypto_ctx.initialized==0, sc_set_peer_public_key returns
SC_ERR_NOT_INITIALIZED, and all subsequent sc_encrypt (INIT, etc) fail with
'encryption failed' error 2. Fixed in cm_start_phase_direct and
reverse-connect path (both places that create ETCP_CONN for conn_mgr).
- chat_core_connect_from_invite: add TOPO_SOCKMETA4 (id=0, UNKNOWN, UNKNOWN)
so cm_has_direct_ip/cm_start_phase_direct can match socket_id=0 addr
- conn_mgr: cm_bg_ping_timer_cb reads real addr from nq->node->v4_addrs
instead of NULL; added cm_bg_ping_noop_cb per required etcp_send_ping_to_socket
- invitedialog: set both QClipboard::Clipboard and Selection on Linux/X11
- conn_mgr.c: 5 call sites used queue_entry_new(data_size) with data[] instead
of dgram — all etcp_route_send calls silently dropped. Fixed by switching to
dgram-based allocation (queue_entry_new(0)+u_malloc) matching all other callers.
- DIRCECT_REQ reuses already-allocated pkt as qe->dgram (no extra memcpy).
- etcp_router.c:1078 — 'empty entry' now shows dgram=%p len=%u dst=0x... force=%d
- etcp_connections.c:1139 — 'bad args' now shows all arg pointers to identify NULL
- etcp_connections.c:1145 — 'no socket' now shows addr_family=%d
- conn_mgr.c:633 — 'no candidates' now notes direct+reverse failed
- debug_ui.h: remove NDEBUG guard so GUI_ERROR works in Release builds
- invite_link.h/cpp: add error field to InviteData with specific failure reason
- joindialog: show exact decode error in QLabel instead of generic message
- chat_sync: implement invite connect flow (CHANNEL_INFO_REQ/RESP, JOIN, WELCOME)
- topo_node_sqlite: node/address table init and lookup
- utun_node: getInviteAddresses fallback from ETCP sockets
- minor fixes in mainwindow, chat_core, gui_bridge
- Add CreateGroupDialog with group name input
- Generate X25519+Ed25519 keypairs, random uint64 channel_id,
Ed25519 signature, write to DB via uasync thread
- chat_core_create_channel(): create msg table, topo_node_sqlite_channel_put()
- GUI_EVT_CHANNEL_UPDATED notification to reload channel list
- Per-category debug config: debug_level= + debug_categories= in [gui]
- Unified logging via debug_config: all threads write to same file/console
- debug_enable_console(1) to mirror file output to stderr
- DEBUG_LEVEL_DISABLED=-1: truly disable category, NONE=0 fallback to global
- Fix uasync_post under epoll: process_posted_tasks was never called
- Fix MainWindow constructor parameter ordering (dbPath vs debugFile)
- debug_ui.h: append mode ('a' instead of 'w')
- CHAT groups don't send subnets and skip route insert/delete
- Group type mismatch sends ERR_GROUP_MISMATCH to peer
- New topo_groups_create_group() public API for creating typed groups
- Renamed TOPO_BGP to TOPO_GROUP with topo_group_id (64bit)
- Added TOPO_GROUPS container (ll_queue group_list) in UTUN_INSTANCE
- Memory pools moved from TOPO_GROUP to TOPO_GROUPS (instance-level)
- Default group: TOPO_GROUP_UTUN = 0x8000000000000000
- topo_groups_get_default() searches by group_id, not just first entry
- All topo_bgp_* renamed to topo_group_*; function signatures updated
- Files: topo_bgp.h/c -> topo_group.h/c
- NODEINFO_MSG (protocol, packed): added flags byte + group_id field
- NODEINFO (memory): ref_count, linked list heads instead of inline arrays
- NODEINFO_ROUTES: separate struct with linked list subnet heads
- NODEINFO_Q: node*, routes*, tranzit_data*, hop_list* as separate mallocs
- 6 memory_pools in ROUTE_BGP for NI_* linked list items
- ni_list_count() universal counter via _ni_head cast
- nodeinfo_serialize/deserialize for protocol <-> memory conversion
- NODEINFO_FLAG_SEND_SUBNETS controls subnet data in protocol
- group_id defaults: utun=NODEINFO_GROUP_UTUN(1) with subnets
Fixes:
- deserialization: data+2 instead of data+sizeof(BGP_NODEINFO_PACKET)
- memset: start after ll_entry to preserve ll.size
- hop_src: subtract hop_count*8 to point at correct dynamic offset
- same-ver branch: remove_path(conn) instead of remove_path_by_hop(peer)
- double-free in route_bgp_remove_conn/process_withdraw
- conn_mgr_add_alien_node: rewritten for new structures
- all test files updated for new API
- Add --hardened flag to build.sh with FORTIFY, stack protector, PIE, RELRO
- Add --enable-hardening to configure.ac
- F-001: fix %s -> %.32s to prevent stack leak from non-null-terminated network string
- F-002: add pre-check recv_len >= MAX before buf_space computation to prevent size_t underflow
Evgeny
jeka