- ConfigProvider: флаг service_enabled (DataStore), flow/getter/setter
- MainActivity: автозапуск сервиса только при service_enabled; edge-to-edge со светлыми иконками статус-бара
- SettingsScreen: секция Service (start/stop), stop/exit сохраняет состояние; NativeLib.restart гейтится по isReady чтобы ядро не запускалось без сервиса
standby.h/c: duty-cycle ACTIVE/SLEEP, standby_wait() будит в burst сразу,
в SLEEP — до следующего burst; notify_network_activity для раннего пробуждения.
Интеграция (по флагу UTUN_HAVE_STANDBY, десктоп без изменений):
- conn_mgr: bg_ping/candidate_ping в SLEEP defer через standby_wait
- route_connectivity: probe_node откладывается (PROBE_STATUS_DEFERRED)
- topo_group_connect: пауза между попытками — активный режим 1с, фон standby_wait
- jni_bridge/ConfigProvider/NetworkActivityMonitor: set_active + сетевая активность
- chat_setting: standby_active_sec/sleep_sec/min_sleep_sec
+ юнит-тест test_standby (31 проверок)
- dedup double ETCP_CONN_STATUS_UP (UDP+TCP links) in topo_group_new_conn
- close conn_mgr handle on TIMEOUT in Phase2/3 (fix stuck 'already connecting')
- infinite Phase1→2→3 cycle with pause (1s active / 30s standby)
- CHAT_EVT_CONNECTING_NODES: yellow circle in member list while connecting
- Android: client_activity wiring via onStart/onStop + nativeSetActive
- function-level comments in topo_group_connect.c
- client_activity: desktop/server now ACTIVE by default, only mobile starts STANDBY
- topo_group_connect: endless Phase1→2→3→1 cycle until connected
- Pause between failed Phase2/3 attempts: 1s active, 30s standby
- on_down always triggers cycle_restart when active_conn_count=0
- re-init destroys previous state and starts fresh
- CHAT_EVT_CONNECTING_NODES event notifies GUI of current connecting nodes
- Android: ConfigProvider default mode='auto', PTT fix, UDP log timer fix
- android_jni_bridge: utun_bridge_set_debug_level actually calls debug_set_level / debug_set_category_level_by_name (was stub)
- SettingsScreen: CATEGORIES updated to match current g_debug_categories from debug_config.c
- ConfigProvider: persist category levels in [debug] section of generated INI config
- u_async: poll() log uses computed timeout_ms instead of confusing %d.%dms format
- u_async: timeout_node char name[16] → const char* name (no truncation, smaller struct)
- memory_pool: pool alloc/free debug logs moved from DEBUG to TRACE
- instance_lite: poll timeout changed from 10ms (100tb) to infinite (-1) — sleeps until traffic
- instance_lite: removed useless heartbeat timer
- Extend MEMBER_DETAIL_LINK_SIZE to 63B with 20B sock_name per link
- Replace link_count with links_up/links_down (two uint16) in sock snap
- Add BGP hop list collection via topo_node_best_hop_list, post as CHAT_EVT_BGP_INFO
- Add direct RTT summary text via same event
- Rework AccountList detail panel: header + QTextEdit with monospace layout
- Display protocol (TCP/UDP), socket name line, colored dots for connections
- Show [up/down] link counts for self listen sockets
- Remove * prefix from link count display in Android
- u_async.c: process immediate_queue BEFORE epoll_wait in uasync_poll
- stcp_link.c: defensive NULL etcp_conn/etcp_link in stcp_link_close
- utun_instance.c: move stcp_server_list_destroy_all to Phase J (before ETCP),
add deferred drain in both Phase J and L
- stcp.h/c: STCP_HS_ENC_CLIENT 6→38, STCP_HS_ENC_SERVER 7→39,
exchange ed25519_pubkey in both handshake directions
- etcp_connections.c: copy peer_ed25519 from STCP to ETCP_CONN in
etcp_link_enter_ready_tcp; guard link->etcp in tcp_link_close_cb
- chat_sync.c: fix lk->conn NULL dereference for TCP links
- test_stcp.c: update stcp_server_create/stcp_client_connect callsites
- tools/chat_tcp_test: change transport udp→tcp
- etcp_connections.h: add WIRE_OVERHEAD, IP_UDP_OVERHEAD_V4/V6, SC_ENCRYPT_OVERHEAD
(properly accounts for v6 IP(40)+UDP(8)+SC(3)+CCM tag(16) = 67 vs old UDP_HDR_SIZE=28)
- etcp_connections.c etcp_encrypt_send: use WIRE_OVERHEAD instead of UDP_HDR_SIZE
- etcp_connections.c send_init_response: clamp padding to max_data = mtu - WIRE_OVERHEAD
- chat_core_priv.h: add addr_type_from_ip() classifier
- chat_profile.c, chat_sync.c, member_sync.c: use classified addr_type instead of hardcoded 0
- chat_sync.c: skip zero nat_addr in JOIN, fall back to interface_addr
- topo_node_sqlite.c, member_sync.c: remove addr_type=0 filter from SELECT/DELETE
- chat_profile.c, member_sync.c: DELETE all addresses (not just addr_type=0)
- node_put/node_update_verified: set online=1 on INSERT (nodes created when conn is UP)
- channel_peers_all: fix peer_needed calculation (atl byte was missing)
- cs_send_channel_join: add proto byte to address serialization matching all parsers
Root cause: instance_lite_restart was creating new thread without
re-setting g_event_handler, causing all chat events (CHANNEL_UPDATED,
CONNECT_RESULT, etc.) to be silently dropped after app restart.
Fixes:
- instance_lite_restart: save/restore g_event_handler across hard restart
- instance_thread restart loop: re-call chat_event_set_handler after uasync_create
- utun_bridge_restart: call instance_lite_set_event_handler before restart
- AppEventHandler SharedFlow replay: 1 → 16 to not lose early init events
- ViewModel: added diagnostic logging for channel/connect events
- Keep diagnostic logs in instance_lite (set_handler, chat_event_forward NULL check)
- instance_event_handler: removed static for cross-block forward declaration
Android: file picker → pending preview bar (name+size+X) →
combined send with text; cache copy, save dialog for downloads
Desktop: attach stores pending, preview bar before send,
combined with text in onSendClicked
C: attachment_sender.c — include filename in msg data for display
- stcp_server_create: support AF_INET and AF_INET6 V6ONLY=1 (no dual-stack)
- Add listen_family to stcp_link_config
- init_sockets: return error (not partial) on any bind failure
- add chat_core_sync_my_addresses() call at chatgui startup
- collect_my_addrs: add proto byte (1=UDP, 2=TCP) to binary format
- chat_sync.c JOIN/WELCOME/PEER_UPSERT: read proto byte, write protocol column
- member_sync.c: read proto byte, dynamic protocol bind
- topo_node.c: debug logs for nodeinfo changed detection
- node_config.cpp: type=public for all servers
node_conn_direct:
- ncd_init_cb: skip UP when links_up==0, ncd_up_cb delivers when link comes up
- close/force_close: handle_count safety checks, callback clearing
- open/open_node case 2: create links on reused dead conn
- ncd_create_links: skip duplicate link on same conn (stale->etcp==conn)
- set_callback: optional callback change on live handle
conn_mgr:
- cm_ncd_callback: DOWN only delivers event (handle stays alive)
- cm_ncd_callback: TIMEOUT force_close BEFORE cm_deliver_event
- cm_deliver_event: read handle fields to locals before callback (reentrany-safe)
- INVITE_INFO_REQ/RESP: add duplicate cmd byte for direct-send protocol
- cm_handle_invite_info_resp: search invite by group_id in channel conn_mgr
Android:
- node_id computed by sc_derive_node_id_from_pubkey in C, not Kotlin
- utun_bridge_join_channel: recompute node_id, log mismatch
- invite_link_c: compute nodeId from pubkey via sc_derive_node_id_from_pubkey
- NativeLib.deriveNodeId, InviteLink.kt uses C function
Android chatgui:
- New MemberListScreen with member list, detail card, edit dialog
- Link status dots (green/red/grey) per address in detail card (1s poll)
- Self-node name coloured green
- ChatScreen: people icon in TopAppBar
IPv6 autoconnect fixes (3 bugs in conn_mgr/topo):
- topo_node_sqlite_node_load: load v6 addresses from DB
- topo_node_registry_store: merge v6_addrs into existing node
- cm_sock_v6_classify: wildcard [::] treated as CM_V6_DIR
- cm_add_v6_link: htons(port) was missing
Memory fixes:
- strdup→u_strdup in bridge (7 instances)
- u_realloc cap update before success check (3 instances)
- char sql[256]→[512] for truncated SELECT
Chat member hash now includes addresses for change detection
Linux chatgui:
- Link status dots in AccountList detail panel (1s poll)
- Self-node name in green in member list
VoiceBubble is now a pure renderer — no local state, no LaunchedEffect, no timer.
All state from ViewModel.playbackState StateFlow:
- playing/paused/elapsedMs/progress/filePath — one atomic snapshot
- isActive = playbackState.filePath == message.filePath — only active clip shows cursor
- onProgress callback from AudioRecorderManager feeds real elapsed into ViewModel
- ViewModel timer (80ms) updates progress between onProgress callbacks
Removed: VoiceBubble's playing/paused/seekVersion/PlayState/onDone/onPaused.
Removed: AudioRecorderManager's isPaused/elapsedMs/pausedElapsedMs.
stopped flag was set before join() but cleared after, causing race:
if thread was still blocked in decodeRead when stopped was reset,
onComplete fired anyway. Monotonic playGeneration ++ never decreases,
thread captures myGen at start, compares after completion —
correctly skipped if generation changed (another stop/seek started).
PlayState data class bundles playId, elapsedMs, progress into one atomic snapshot.
LaunchedEffect keyed on playId — when it changes (seek/resume), the timer reads
elapsedMs and progress from the SAME snapshot, eliminating the race between
seekVersion++ and elapsedMs=seekMs.
When playing=true and seek happens, LaunchedEffect(playing) key didn't change,
so the elapsed timer kept using the old start time. Added seekVersion counter
as second key — increments on waveform tap and play/resume click, forcing
the timer coroutine to restart with the new elapsedMs position.
When stopPlayback/pausePlayback kills the playback thread, the thread's
onComplete callback was still firing, resetting UI state (playing=false,
elapsed=0). Added @Volatile 'stopped' flag — onComplete only fires on
natural completion, not on external stop/pause.
- Canvas pointerInput moved to wrapping Box (state updates trigger recomposition)
- showCursor = playing || paused (cursor and white bars visible on pause)
- elapsed/dur stays visible on pause too
- ViewModel: _currentPlayingPath tracks active track. Tap same → stop.
Tap different → stop old, play new. onComplete clears currentPlayingPath.
- AudioRecorderManager: stopPlayback() already called at start (existing)
- VoiceBubble: simplified click, always sends to ViewModel for state management
evgeny