- utun_instance.h: add chat_connections queue (indexed by node_id, 8 bytes)
- chat_sync.c: queue_new in init, queue_free in destroy, queue_find_data_by_index in cs_find_conn_for_node
- chat_sync.c: remove from queue in cs_on_conn_down
- chat_core.c: add to queue in connect_from_invite and connect_auto
- chat_core.c: remove from queue in cc_parallel_cleanup and ca_cleanup
- db_sync.c: replace linear conn search with queue_find_data_by_index (db_sync_send_hash)
- Replace db_sync_stub.c with real src/db_sync.c in libutun
- Remove message sync protocol from chat_sync (INIT_SYNC/INIT_RESP/SEND_DATA/PUSH/ACK_PUSH/SYNC_DONE)
- Keep chat_sync auxiliary: join protocol, peer management, auto-connect
- Remove chat_core_insert_record, cursor_*, mark_sent/ttl_delete stubs
- chat_core on_db_sync_insert now only does SQLite INSERT + GUI notify
- Move db_sync_init() from instance_init_common to utun_instance_init for config override timing
- Force db_sync_enabled=1 in utun_node.cpp
- db_sync handles all P2P message sync via service 0x20
Replace etcp_router_bind/etcp_route_send/etcp_router_unbind with
direct etcp_bind/etcp_send/etcp_unbind + find-conn-by-node_id helpers.
Same approach as db_sync (0x20). Service IDs unchanged (0x30, 0x31).
ca_ready_cb and cc_parallel_ready_cb called etcp_connection_close
synchronously on non-selected connections from within the ready_cbk
callback chain. This corrupts senders_list in topo_group, causing
UAF in topo_group_start_link_nat_check.
Now uses uasync_call_soon (zero-delay timer) to defer the close
to the next event loop iteration, after the callback chain completes
and callbacks_running flag is reset.
- Added struct ca_ctx** ctxs to ca_state (parallel array)
- ca_cleanup now frees all ctxs[i] and the ctxs array
- ca_ready_cb: removed u_free(ctx), added etcp_conn_remove_ready_cbk before cleanup
- ca_timeout_cb: removed u_free(ctx) — ctx lives until ca_cleanup
- All error paths set ctxs[i]=NULL for ca_cleanup safety
etcp_connection_create does NOT add conn to inst->connections list.
Without this, incoming INIT handler can't find the outbound conn
by peer_node_id and creates a new one, causing insert_link collision.
- ca_timeout_cb: removed etcp_connection_close, ETCP lives past 3s timeout
- ca_state.cancelled flag + chat_core_connect_auto_cancel() for external cancel
- chat_core_connect_auto returns ca_state* via out_state
- Rewritten auto_connect: cursor (ch,peer) instead of bulk collect
- GC every 1s: closes flights with no link_status after 3s
- ac_result_cb no longer clears ca_state (GC handles cleanup)
- stop: cancels all flights via chat_core_connect_auto_cancel
- chat_core_connect_auto: direct ETCP connect from SQLite (no BGP)
- auto_connect: parallel connect to peers with 3s timeout, retry 10s
- RTT saved to node_addresses on disconnect
- vertical status bar + circle badge with online count per channel
- ChannelListView prevents deselection
- Replace get_time_us() with utun_gettimeofday() for PUSH message timestamps
(db_sync.c, chat_core.c) — monotonic clocks differ across Linux/Windows
- Fix merkle_sync: restart session timer in _handle_request to prevent
double-sided timeout when both nodes start member_sync simultaneously
- Fix INIT_RESP short-format: don't mark synced when my_count > peer_count
- Add db_sync_get_last_timestamp() to avoid duplicate timestamp generation
between db_sync and chat_core on_db_sync_insert
- Fix db_sync_stub to generate timestamps consistently
- build.sh: auto-rebuild chatgui via CMake after utun build
chat_sync_push: add chain_hash parameter, use it instead of zeros
(fixes chain_hash mismatch → all PUSH messages were rejected)
on_db_sync_insert: pass computed chain_h to chat_sync_push
cs_handle_channel_join: call member_sync_start for the joiner
(server now initiates member sync when client joins.
Previously merkle_sync was only started by client → timeout
because server never responded)
cs_handle_welcome: add DEBUG_INFO before member_sync_start on client side
chat_sync_push: fix PUSH format to match cs_handle_push expectations
(was missing insert_record header: ts+dh+nid before ct+dlen+data)
Add DEBUG_INFO log with peer count after send.
on_db_sync_insert: call chat_sync_push after successful local insert
→ new messages are now pushed to all connected peers
Add DEBUG_ERROR to 4 silent returns (JSON parse fail, SQL errors)
chat_core_submit_message: add DEBUG_INFO entry log (ch, ct, len)
chat_core_insert_record: add DEBUG_WARN/ERROR to 7 silent returns
(truncated record, SQL prepare fail, unknown step error)
cs_handle_push: add DEBUG_INFO for ACK send, DEBUG_ERROR for insert fail
cs_handle_send_data: DEBUG_WARN when record truncated mid-loop
cs_on_conn_up: DEBUG_INFO sync path with channel count
Full trace now shows every message: SUBMIT → insert → PUSH → RECV PUSH → ACK
- cs_handle_init_resp: change silent reject len<37→len<5 (actual payload
sent is 6 bytes, plen=5 after stripping type byte).
Support short format (synced, peer_count+sparse_count) and long format
(divergence, with test_pos+peer_ch). Add INFO logs at each decision.
(fixes sync never starting after invite join — RECV INIT_RESP len=5
was silently rejected)
- All 12 silent return branches in handlers: add DEBUG_WARN with
handler name, peer, ch_id, and reason (makes malformed packets
visible in logs)
- Key sync flow INFO logs:
cs_handle_init_sync: peer_count, my_count
cs_handle_send_data: records sent/received count
cs_on_conn_up: invite vs sync path
chat_core_insert_record: successful insert
- on_db_sync_insert: parse JSON {"n":...,"ct":...,"d":...}, store
d→data, n→node_id, ct→content_type with proper chain_hash
(fixes JSON displayed instead of message text)
- chat_core_cursor_open: SELECT chain_hash column
- chat_core_cursor_next: include chain_hash(32) in output record
- cs_handle_send_data: parse chain_hash in received records
(fixes chain_hash mismatch → all sync records were dropped)
- cs_handle_channel_join: post GUI_EVT_MEMBERS_CHANGED
(fixes creator not seeing new member after join)
- cs_handle_welcome: trigger INIT_SYNC with inviter after join
(fixes no message sync after invite join)
New category (id=25) replaces DEBUG_CATEGORY_DEBUG in chat_sync and
chat_core. This allows enabling only protocol-level logs (SEND/RECV,
timeouts, handshake) without the noise from DEBUG category.
Changes:
- debug_config.h: add CONNECTIVITY=25, COUNT→26
- debug_config.c: add 'connectivity' to g_debug_categories
- chat_sync.c: DEBUG→CONNECTIVITY in all protocol logs
- chat_core.c: DEBUG→CONNECTIVITY in connection/create logs
- utun_node.cpp: remove hardcoded DEBUG=TRACE (now config-driven)
- chatgui.cfg: connectivity=info in debug_categories
When server restarts, new ETCP_CONN has session_id=0 (calloc).
If client sends INIT_REQUEST_NOINIT (0x04) with session_id=0,
the condition conn->session_id != session_id is false (both 0),
so no reset was sent. Client kept old seq numbers while server
expected seq=1, causing 'Waiting for initial packet' deadlock.
Fix: add || new_conn to the condition — when server created a
fresh connection (was restarted), always send reset to client.
- chat_core_connect_from_invite: add TOPO_SOCKMETA4 (id=0, UNKNOWN, UNKNOWN)
so cm_has_direct_ip/cm_start_phase_direct can match socket_id=0 addr
- conn_mgr: cm_bg_ping_timer_cb reads real addr from nq->node->v4_addrs
instead of NULL; added cm_bg_ping_noop_cb per required etcp_send_ping_to_socket
- invitedialog: set both QClipboard::Clipboard and Selection on Linux/X11
- debug_ui.h: remove NDEBUG guard so GUI_ERROR works in Release builds
- invite_link.h/cpp: add error field to InviteData with specific failure reason
- joindialog: show exact decode error in QLabel instead of generic message
- chat_sync: implement invite connect flow (CHANNEL_INFO_REQ/RESP, JOIN, WELCOME)
- topo_node_sqlite: node/address table init and lookup
- utun_node: getInviteAddresses fallback from ETCP sockets
- minor fixes in mainwindow, chat_core, gui_bridge
- Add CreateGroupDialog with group name input
- Generate X25519+Ed25519 keypairs, random uint64 channel_id,
Ed25519 signature, write to DB via uasync thread
- chat_core_create_channel(): create msg table, topo_node_sqlite_channel_put()
- GUI_EVT_CHANNEL_UPDATED notification to reload channel list
- Per-category debug config: debug_level= + debug_categories= in [gui]
- Unified logging via debug_config: all threads write to same file/console
- debug_enable_console(1) to mirror file output to stderr
- DEBUG_LEVEL_DISABLED=-1: truly disable category, NONE=0 fallback to global
- Fix uasync_post under epoll: process_posted_tasks was never called
- Fix MainWindow constructor parameter ordering (dbPath vs debugFile)
- debug_ui.h: append mode ('a' instead of 'w')
- Renamed TOPO_BGP to TOPO_GROUP with topo_group_id (64bit)
- Added TOPO_GROUPS container (ll_queue group_list) in UTUN_INSTANCE
- Memory pools moved from TOPO_GROUP to TOPO_GROUPS (instance-level)
- Default group: TOPO_GROUP_UTUN = 0x8000000000000000
- topo_groups_get_default() searches by group_id, not just first entry
- All topo_bgp_* renamed to topo_group_*; function signatures updated
- Files: topo_bgp.h/c -> topo_group.h/c
Evgeny