- cs_handle_channel_join: call cs_post_channel_online immediately after adding joiner
- member_sync_start with _on_invite_sync_done callback: on MT_OK push online=1 via merkle_sync_push_update
- DEBUG per-peer online status in cs_post_channel_online
- cs_on_conn_up: call cs_on_peer_status_changed(peer,1) before return
in invite path (was skipped, leaving inviter at online=0 in DB)
- cs_handle_welcome: remove unconditional set_online(0) — online
status is managed by conn_up/conn_down, not by WELCOME
- cs_handle_welcome: add cs_post_channel_online() after WELCOME
to send PEERS_ONLINE to GUI when channel is fully loaded
- cs_post_channel_online: add DEBUG log for PEERS_ONLINE event
- db_sync peer_check: suppress spam log when no peers connected
- chat_core_sync_my_addresses: DELETE + INSERT с подсчётом строк, CHECK verify
- chat_core_connect_from_invite: DELETE + INSERT с IP:port
- member_sync_put: DELETE + INSERT с IP:port, warn если addrs_data=NULL
- cs_handle_channel_info_resp: адрес инвайтера из ETCP link
- cs_handle_channel_join: адреса джойнера
- cs_handle_peer_upsert: адреса пира
- cs_handle_welcome: адреса из WELCOME
Все логи с префиксом [ADDR_SYNC] в DEBUG_CATEGORY_DEBUG
- mainwindow.cpp: swap setupMessaging() before setupNode() so g_receiver is created first
- gui_bridge_impl.cpp: add DEBUG_WARN when gui_bridge_post drops event due to NULL g_receiver
- utun_node.cpp: open topo_sqlite_db with FULLMUTEX + all PRAGMAs (WAL, FK, NORMAL sync, checkpoint)
- db_sync.c: reuse inst->topo_sqlite_db if available (shared_db flag)
- chat_core.c: reuse inst->topo_sqlite_db if available (shared_db flag)
- db_sync_destroy/chat_core_destroy: skip close on shared handle
- Only topo_groups_destroy closes the shared handle
- Fallback: each module opens own connection if topo_sqlite_db is NULL
ready_cbks/etcp_conn_set_ready_cbk/add_ready/remove_ready → init_cbks/..._init_cbk
ca_ready_cb → ca_init_cb
cm_direct_ready_cb → cm_direct_init_cb
cm_reverse_ready_cb → cm_reverse_init_cb
ntp_node_on_conn_ready → ntp_node_on_conn_init
connect_ready_cb → connect_init_cb
init accurately describes when conn->initialized=1, before keepalives establish UP.
Also fire etcp_fire_conn_status INIT at this point instead of create time.
- chat_core.c: dump node_addresses total, per-node counts, nodes lookup before addr query
- topo_group.c: log db path, rc, and db pointer after sqlite3_open
- topo_group.c: open {db_path}/chats.db instead of {db_path} — was opening a directory
- chat_core.c: remove inst->topo_sqlite_db = g_cc.db — keep topo_sqlite_db as separate
uTun-only connection without FULLMUTEX, avoiding contention with GUI reads
- chat_core.c: add DEBUG_INFO before each synchronous cb(FAIL) — pinpoints exact failure reason
- chat_sync.c: add log in ac_fill when ca_state=NULL after chat_core_connect_auto call
- Add etcp_add_conn_status_cbk/remove/set — unified callback for all connections
- 4 statuses: NEW, UP, DOWN, DELETE — one subscription covers all connections
- Fire points in etcp.c: create→NEW, on_up→UP, on_down→DOWN, close→DELETE
- chat_sync.c: replace cs_on_new_conn+per-conn subs with cs_on_conn_status
- db_sync.c: same migration to instance-level callback
- cs_is_peer_online: use conn->links_up instead of link->link_status (was 0 during INIT handshake)
- db_sync: rename column author→node_id, open chats.db instead of sync file,
db_sync_instance_add takes table_name directly
- chat_core: remove CREATE TABLE msg_ch_*, remove on_db_sync_insert (74 lines),
remove fallback INSERT in submit_message, add minimal on_msg_inserted
for GUI notification only
- db_manager: update getMessages for new schema (parse JSON from data column),
fix ORDER BY to use author_signature instead of datahash,
update syncCursorNext to parse JSON
- si_register simplified: db_count from same table, no more msg vs sync gap
- chat_core_has_conn: search all connections (pending+ready) by peer_node_id
- chat_core_connect_from_invite: skip chat_core_connect_auto if already connected
- ca_timeout_cb: close timed-out connection to free socket link slot
+ cancel remaining timers + ca_cleanup on all-failed
- cs_handle_welcome(): add self to local peers_<ch_id> so
joiner sees own account in channel member list
- cs_on_conn_up(): post CHANNEL_PEERS_ONLINE after reconnect
so GUI shows connected status (was only posted on conn_down)
- etcp_loadbalancer: DEBUG_WARN -> DEBUG_DEBUG for no suitable
link: tmr:wait — normal shaper behavior, not a warning
- chat_core_sync_my_addresses(): remove private IP filter (192.168, 10.x, etc.)
so LAN addresses are stored for direct connections
- topo_node_sqlite_channel_peers_all(): include peers without addresses
in WELCOME message (was skipped entirely, causing empty peer list)
- chat_core_create_channel(): pass real local addresses to member_sync_put()
instead of NULL,0
- chat_core_init(): log number of channels loaded from DB on startup
- topo_sqlite_db moved from TOPO_GROUPS to UTUN_INSTANCE (direct access)
- topo_groups_set_sqlite_db() removed
- chatgui: chat_sync_connect_node → chat_core_connect_auto (direct ETCP, no conn_mgr)
- chatgui: chat_core_connect_from_invite saves to SQLite → auto connect (no BGP)
- chatgui: removed _on_node_updated BGP callback from member_sync
- chatgui: removed conn_mgr_get_status from status dump
- chatgui: removed all conn_mgr.h and topo_group.h includes
- chatgui: CONN_MGR_ERR_* constants → CC_* in chat_core.h
- removed unused cc_parallel_* code, conn_state_str/conn_type_str helpers
- db_sync_on_conn_up: per-instance synced/skipped counters
- db_sync_peer_check_cb: summary INFO of check results
- db_sync_instance_add: peers_found + peers_synced counts
- db_handle_init_sync/initiate_sync: enhanced with tbl name
- db_handle_init_resp: tp + my_mc in sync complete/dh match
- db_handle_send_data: range + SYNC_DONE details; stop reason when mc>pk
- db_handle_sync_done: both counts + datahashes in mismatch; dh in confirm
- db_sync_recv_cb: INFO when instance NOT FOUND (timing race)
- cs_handle_channel_info_resp: sync readiness after channel ready
- cs_handle_welcome: note about db_sync peer_check timer
- on_db_sync_insert: counter (#1-3 then every 10) with ch/n/ts/dh/ct
Priority: iterate instance->connections for links with NAT_TYPE_DIRECT
(connected and reachable). Fallback: own socket addresses.
Removed broken getOnlinePeerAddresses() which returned other nodes' addresses.
- chat_core.c: CREATE TABLE IF NOT EXISTS peers_* in ensure_channel_ready
- utun_node.cpp: GUI_ERROR redirected to debug log file via guiDebugFile()
- etcp_connections.c: reuse unindexed outbound conn (peer_node_id==0)
on cross-connect INIT to avoid 'Can not insert link to socket'
- cs_find_conn_for_node: show queue state, entry found/missing, conn flags
- cs_on_conn_up: log when skipping due to !initialized
- etcp_conn_queue_set_ready: log reindex details (old/new entry, count)
- etcp_conn_set_peer_node_id: show state+reindexed flag
- utun_instance.h: add chat_connections queue (indexed by node_id, 8 bytes)
- chat_sync.c: queue_new in init, queue_free in destroy, queue_find_data_by_index in cs_find_conn_for_node
- chat_sync.c: remove from queue in cs_on_conn_down
- chat_core.c: add to queue in connect_from_invite and connect_auto
- chat_core.c: remove from queue in cc_parallel_cleanup and ca_cleanup
- db_sync.c: replace linear conn search with queue_find_data_by_index (db_sync_send_hash)
Evgeny