- Remove is_dm column from channels table (dm detection by member count)
- Rename member name column to userinfo — extensible json_flat format
- Add json_flat.c/h library for compact JSON serialization
- Fix join_sig message format: use ch_x25519+ch_ed25519 instead of channel_id string
- Remove name from join_msg body (now in userinfo via json_flat)
- Update chat_core, chat_sync, member_sync, db_manager to new format
- Add topo_strategy.txt — архитектурные заметки по топологии
check_drift() вызывался с сырой разницей часов между узлами, а не
с изменением offset со временем. При разнице часов между машинами
в 229 секунд это давало спам WARN на каждый TIME_SYNC обмен.
Теперь: первый обмен сохраняет offset без проверки; последующие
сравнивают дельту и warn только при реальном дрейфе (изменении offset).
- chat_conn_mgr.c/h: new connection manager (1 per instance, global in g_cc)
- cm_rotation() — single rotation method: random addr pick, INIT, retry
- 10 parallel slots per node (CM_MAX_PARALLEL), evict worst RTT on excess
- DEAD slot reuse before close — close only when replacement ready
- per-connection DOWN callback via etcp_conn_add_down_cbk
- background ping cycle: random node→random addr RTT measurement
- chat_core.c: added g_cc.conn_mgr field, init/destroy/getter
- chat_sync.c: migrate to new API, add_node() at WELCOME/JOIN/PEER_UPSERT
- Removed old ca_state/ca_ctx/ca_* single-flight code
- Sound files loaded from filesystem (sound_dir in INI config, absolute or relative)
- Per-event enable/disable + volume stored in DB (ui_state table)
- SoundManager: setEvent(), effective volume = master * per-event
- SoundSettingsPage UI: 4 event rows (checkbox + slider)
- chat_core_save_ui_state() for async DB writes via uasync thread
- DbManager::getUiStateInt() for reading settings from GUI thread
- Default sounds copied to sounds/ dir next to DB, config entries written
INSERT OR REPLACE deletes the old row and inserts a new one,
resetting unspecified columns (online, update_ts) to DEFAULT 0.
This was wiping online=1 set by cs_on_peer_status_changed/member_sync_set_online.
Replaced 5 INSERT OR REPLACE INTO nodes with INSERT INTO ... ON CONFLICT
DO UPDATE SET — only updates the specified columns, preserving online status.
Files:
- chat_core.c:638 (invite flow)
- chat_sync.c:1045 (CHANNEL_INFO_RESP), 1193 (JOIN), 1449 (PEER_UPSERT)
- topo_node_sqlite.c:121 (BGP node_put)
- showJoinDialog: don't call loadChannels after dialog close — channel already in model via CHANNEL_UPDATED event, online badge via CHANNEL_PEERS_ONLINE. Duplicate loadChannels was resetting the peer online count.
- onConnectResult: remove 800ms QTimer — dialog closes immediately. Channel data arrives independently through the event pipeline.
- cs_handle_channel_join: call cs_post_channel_online immediately after adding joiner
- member_sync_start with _on_invite_sync_done callback: on MT_OK push online=1 via merkle_sync_push_update
- DEBUG per-peer online status in cs_post_channel_online
- Замена контекстного меню 'Пригласить' на кнопку + (18x18) справа снизу каждого канала с hover-эффектом
- InviteDialog: авто-копирование ссылки в буфер (Clipboard + Selection) при открытии
- JoinDialog: параметр autoJoinLink — если в буфере валидная utun:// ссылка, диалог сразу стартует подключение
- cs_on_conn_up: call cs_on_peer_status_changed(peer,1) before return
in invite path (was skipped, leaving inviter at online=0 in DB)
- cs_handle_welcome: remove unconditional set_online(0) — online
status is managed by conn_up/conn_down, not by WELCOME
- cs_handle_welcome: add cs_post_channel_online() after WELCOME
to send PEERS_ONLINE to GUI when channel is fully loaded
- cs_post_channel_online: add DEBUG log for PEERS_ONLINE event
- db_sync peer_check: suppress spam log when no peers connected
- chat_core_sync_my_addresses: DELETE + INSERT с подсчётом строк, CHECK verify
- chat_core_connect_from_invite: DELETE + INSERT с IP:port
- member_sync_put: DELETE + INSERT с IP:port, warn если addrs_data=NULL
- cs_handle_channel_info_resp: адрес инвайтера из ETCP link
- cs_handle_channel_join: адреса джойнера
- cs_handle_peer_upsert: адреса пира
- cs_handle_welcome: адреса из WELCOME
Все логи с префиксом [ADDR_SYNC] в DEBUG_CATEGORY_DEBUG
- mainwindow.cpp: swap setupMessaging() before setupNode() so g_receiver is created first
- gui_bridge_impl.cpp: add DEBUG_WARN when gui_bridge_post drops event due to NULL g_receiver
- utun_node.cpp: open topo_sqlite_db with FULLMUTEX + all PRAGMAs (WAL, FK, NORMAL sync, checkpoint)
- db_sync.c: reuse inst->topo_sqlite_db if available (shared_db flag)
- chat_core.c: reuse inst->topo_sqlite_db if available (shared_db flag)
- db_sync_destroy/chat_core_destroy: skip close on shared handle
- Only topo_groups_destroy closes the shared handle
- Fallback: each module opens own connection if topo_sqlite_db is NULL
- NodesPage: show full 64-bit Node ID (hex16) instead of truncated 4 hex chars
- NodesPage: show diagnostic when DB handle is NULL (was silent return)
- DatabaseSettingsPage: show 'Database not connected' when DB handle is NULL
- DatabaseSettingsPage: add refreshStatus() called on tab select
- SettingsDialog: refresh Database tab on category change
ready_cbks/etcp_conn_set_ready_cbk/add_ready/remove_ready → init_cbks/..._init_cbk
ca_ready_cb → ca_init_cb
cm_direct_ready_cb → cm_direct_init_cb
cm_reverse_ready_cb → cm_reverse_init_cb
ntp_node_on_conn_ready → ntp_node_on_conn_init
connect_ready_cb → connect_init_cb
init accurately describes when conn->initialized=1, before keepalives establish UP.
Also fire etcp_fire_conn_status INIT at this point instead of create time.
When INIT_SYNC arrives for an unknown hash, scan all msg_* tables in
sqlite_master, compute SHA256 of channel_id, match the hash, and
auto-register via db_sync_instance_add. Fixes invite flow where
channel was created but db_sync wasn't notified.
- chat_core.c: dump node_addresses total, per-node counts, nodes lookup before addr query
- topo_group.c: log db path, rc, and db pointer after sqlite3_open
- topo_group.c: open {db_path}/chats.db instead of {db_path} — was opening a directory
- chat_core.c: remove inst->topo_sqlite_db = g_cc.db — keep topo_sqlite_db as separate
uTun-only connection without FULLMUTEX, avoiding contention with GUI reads
- chat_core.c: add DEBUG_INFO before each synchronous cb(FAIL) — pinpoints exact failure reason
- chat_sync.c: add log in ac_fill when ca_state=NULL after chat_core_connect_auto call
- Add etcp_add_conn_status_cbk/remove/set — unified callback for all connections
- 4 statuses: NEW, UP, DOWN, DELETE — one subscription covers all connections
- Fire points in etcp.c: create→NEW, on_up→UP, on_down→DOWN, close→DELETE
- chat_sync.c: replace cs_on_new_conn+per-conn subs with cs_on_conn_status
- db_sync.c: same migration to instance-level callback
- cs_is_peer_online: use conn->links_up instead of link->link_status (was 0 during INIT handshake)
- db_sync: rename column author→node_id, open chats.db instead of sync file,
db_sync_instance_add takes table_name directly
- chat_core: remove CREATE TABLE msg_ch_*, remove on_db_sync_insert (74 lines),
remove fallback INSERT in submit_message, add minimal on_msg_inserted
for GUI notification only
- db_manager: update getMessages for new schema (parse JSON from data column),
fix ORDER BY to use author_signature instead of datahash,
update syncCursorNext to parse JSON
- si_register simplified: db_count from same table, no more msg vs sync gap
Evgeny