tcp_conn_destroy: set read/write queue callbacks to NULL before
queue_free to stop deferred autofetch (drain_cb on freed rc).
write_on_get_cb: throttle consumer_ack to every 8th write_queue
dequeue instead of every single one (was 30+ ACK/sec).
ack_batch field in tcp_proxy_server_conn.
SVC_ROUTE_HDR: +uint8_t flags (23 bytes total).
bit7=START (0x80) — first data packet of new session
bit6=RST (0x40) — sequence violation detected
bit5-4=sess_id (0-3) — cyclically incremented on restart
router_send_one_flags: sets START+sess_id on first data packet.
router_send_ack: sets sess_id only (no START for ACK).
etcp_router_recv_cb: detects restart via sess_id change or START flag.
Old seq=0 heuristic replaced with explicit flags.
etcp_router_conn_get: init sess_id=0, peer_sess_id=0, start_sent=0.
etcp_router_conn_restart: increment sess_id before closing rconn.
etcp_router: new etcp_router_conn_restart(inst, node_id, svc_id) — closes
all rconns for the peer, notifies service via cb(NULL, entry) with
node_id, resets seq state.
seq=0 detection in etcp_router_recv_cb: when rx_seq >= 256 (MAX_INFLIGHT)
and a data packet arrives with seq=0, detect peer restart and reset rconn.
tcp_proxy_client: handle TCP_PROXY_SUBCMD_RESTART — clear all client conns
and server conns for the restarted peer.
Threshold prevents false positives on in-window seq=0 duplicates.
Six key log points at DEBUG level to trace the full ACK chain:
ETCP_SEND — server sends direction A data
ETCP_RECV — received any svc_route packet
SEND_Q_DRAIN — send_q drained after client ACK
SEND_Q_ACKED — server received client ACK (direction A)
CONSUMER_ACK — server sends consumer ACK (direction B)
ACK_SEND — low-level ACK packet sent
router_schedule_ack skips when rx_seq==last_sent_ack_seq (no-op),
so the first consumer_ack call after setting consumer_ack=1 was
silently ignored. Client never got ACK → send_q stuck at 256.
router_ack_do_send always sends the ACK unconditionally.
handle_connect: send first consumer_ack after setting consumer_ack=1
to unblock client router — fixes rq=32/send_q=256 deadlock.
diag_timer_cb: added send_q=N to DIAG line for instant root cause visibility.
read_queue_drain_cb: SOCK:BACKPRESSURE log with send_q count.
write_on_get_cb: SOCK:ACK debug log on each consumer_ack.
1-sec diag_timer_cb prints rq/wq counts+bytes, outstanding pool
allocations, tcp kernel buffer sizes (SO_RCVBUF/SO_SNDBUF).
Started in handle_connect, cancelled in conn_free.
External code pushes to write_queue directly (entry_pool + data_pool).
Added queue_set_threshold(write_queue, 32, 0) for write backpressure.
Tests split data into write_chunk_size chunks before queue put.
lib/u_async: uasync_set_socket_read/write — O(1) EPOLL_CTL_MOD toggle per socket
lib/ll_queue: queue_set_empty_callback — one-shot deferred callback on queue drain
lib/tcp_io: TCP connection management via uasync + ll_queue with pool alloc
- read: direct recv into pool buffer, high/low water flow control
- write: autofetch via ll_queue callback, partial send via write_buf
- on_fin/on_error/on_flushed callbacks, FIN deferred until read_queue drained
- getpeername for pre-connected socket detection
tcp_proxy_server: migrated to tcp_io (22→13 fields, 437→270 lines, -7 functions)
tests: test_tcp_io (5 tests), test_tcp_proxy_server rewritten for tcp_conn
- consumer_ack flag: ACK sent only on consumption, not assembly
- etcp_router_consumer_ack() — called from tcp_proxy_client feed_from_transport
- last_ack_sent_tb: interval-based throttle — send immediately if >=10ms passed,
otherwise timer for remaining time
- timer rules: NULL handle after cancel/fire, NULL check before start
- ROUTER_ACK_INTERVAL_TB 1000→100 (100ms→10ms)
- test_etcp_router_unit: updated test 14 for new immediate-send behavior
- tcp_proxy_client_handle_error: set error flag + send CLOSE once if flag was clear
- tcp_proxy_client_handle_data/handle_close: drop silently, don't send ERROR back
- tcp_proxy_server_handle_data/handle_close: drop silently, don't send ERROR back
- Add recv→send 1MB integration test (3 clients × 3 requests, shell + python)
rx_acked was used for two conflicting purposes:
1. remote ack of our sends (inflight = tx_seq - rx_acked)
2. our last sent ACK seq (dedup: rx_seq != rx_acked)
When the ack timer fired and set rx_acked = rx_seq, it overwrote
the inflight-tracking value. If rx_seq > tx_seq, the computation
tx_seq - rx_acked underflowed (e.g. 18 - 24 = 0xFFFFFFFA),
permanently blocking router_drain_send_q and causing send_q to
grow indefinitely.
Fix:
- Split rx_acked into tx_acked (remote ack, for inflight) and
last_sent_ack_seq (our ACK, for dedup)
- Incoming ACK handler only advances tx_acked forward (stale guard)
- Use int32_t cast on all inflight comparisons to handle stale states
- Add etcp_router architecture diagram (doc/etcp_router_arch.md)
- handle_data: добавить pc->tun_closed в проверку сброса данных от exit
- proxy_feed_from_transport: не писать в PCB после tun_closed
- предотвращает ERR_RST (-14) при записи в TIME_WAIT PCB
- link_status теперь требует двусторонней слышимости: remote && local
- recv_keepalive восстанавливается ДО вычисления link_status (избегает заклинивания)
- loadbalancer_link_ready по переходу 0→1 с проверкой was_up
- ROUTER_SEQ_CLOSE_FLAG (0x80000000): normal conn close
- ROUTER_SEQ_RST_FLAG (0x40000000): conn not found
- router_send_to(): SVC_ROUTE with flags, no conn needed
- router_send_close_to_service(): notify local service [svc_id],len=1
- router_close_and_notify(): CLOSE to remote + close to local + cleanup
- etcp_router_conn_close(): sends CLOSE to remote before cleanup
- etcp_router_conn_close_all_for_node(): close all conns for dead peer
- recv_cb: flags checked only when pl_len==0 (avoid seq collision)
- etcp_router_destroy: close notification to each service
- New SVC_ROUTE_HDR (packed struct, 22 bytes): cmd+dst+src+seq+svc_id
- ETCP_ROUTER_CONN: state per (remote_node_id, svc_id), hash-indexed in router_conns
- Reorder via recv_q (hash by seq), dedup with 32-bit circular compare
- Periodic ACK (100ms), idle ACK (500ms), inflight limit via tx_seq - rx_acked
- Legacy mode: no conn → direct delivery without reorder
- etcp_router_conn_get/send/close API for seq-managed connections
- Unit test test_etcp_router_unit: 18 tests, 3ms, no ETCP/sockets/BGP
- remove sock_transport, transport abstraction, active connections API
- simplify proxy_conn to 13 fields (was 15), remove tcp_proxy_mapping linked list
- new protocol: stream_id 4B, seq 2B cyclic, HDR_SIZE 8B
- add ERROR subcmd for immediate abort, CLOSE for graceful half-close
- proper half-close: shutdown SHUT_WR, keep reading, no timer
- exhaustive DEBUG_ERROR/WARN on all error/unusual branches
- config parser: report unknown options with filename:line and valid keys
- proxy_uip_retry_cb: retry send from uip_to_transport every 5ms
- proxy_recv_cb: buffer to uip_to_transport when send fails, set retry timer
- proxy_feed: drain transport_to_uip when closing_tun || closing_sent (prevents RST)
- proxy_recv_cb(p==NULL): only tcp_recved + closing_tun, no drain
- proxy_poll_cb/tcp_proxy_destroy: cancel retry timer on cleanup
- uip_retry_timer field in proxy_conn
Evgeny