struct TOPO_NODE_REG_ENTRY имел node и ll.data[0] (гибкий массив) на одном смещении.
memcpy(re->ll.data, &node_id, 8) затирало re->node значением node_id,
из-за чего node_registry_find возвращал не указатель а битый node_id → SIGSEGV.
Убрал struct TOPO_NODE_REG_ENTRY, перешёл на явные смещения:
data[0..7]=ключ, data[8..15]=указатель, queue_entry_new(16).
Добавлено:
- conn_mgr_connect_from_invite() — подключение к новому узлу по invite-данным
(INIT → INVITE_INFO_REQ/RESP → проверка членства в группе → сохранение в БД)
- topo_group_connect.c — авто-подключение при старте CHAT-группы:
Phase 1: одновременный connect всех connected=1 пиров, таймаут, отмена незавершённых
Phase 2: последовательный перебор публичных адресов до первого успеха
- Счётчик active_conn_count с проверкой nodeinfo-путей (UP/DOWN)
- restart() при phase=DONE и count==0
БД:
- connected INTEGER NOT NULL DEFAULT 0 в peers_<ch> + ALTER TABLE для существующих
- topo_node_sqlite_set_connected / get_connected_peers / get_public_peers
Chatgui:
- Включён topo_group (убран utun_instance_set_topo_group_enabled(0))
- Создание TOPO_GROUP_TYPE_CHAT при channel_ready и при старте
- Invite connect через conn_mgr_connect_from_invite
- Удалён chat_conn_mgr (из сборки) + весь старый auto-connect код
При разрыве ETCP-соединения модуль собирает каскадно отвалившиеся узлы:
- add_node из hop_list вычисляет next_hop относительно failed_peer,
группирует узлы в отдельные recovery-контексты (direct/indirect списки)
- start запускает асинхронный перебор для каждой группы параллельно
- is_next_hop-узел пробуется первым с приоритетом по мин. RTT
- таймаут 2с на попытку, conn_mgr_cancel_callback при отмене
- отмена: topo_group_new_conn (on_up) находит узел в любом ctx -> ctx целиком
- завершение: оба списка пусты -> освобождение ctx
- conn_mgr_init(TOPO_GROUP* group) — работает внутри заданной группы
- conn_mgr_connect_node: загрузка узла из SQLite если нет в BGP-таблице
- topo_node_sqlite_node_load(): загрузка TOPO_NODE (ref=0) из БД
- cm_start_phase_direct: db_loaded-ветка — перебор всех адресов без NAT-фильтра
- cm_cleanup_db_node: удаление TOPO_NODEQ из группы при неудаче, только если нет путей
- cm_start_phase_indirect: исправлено зависание при best_candidates==0 (cm_deliver_result)
- conn_mgr_set_direct_timeout_ms(): конфигурируемый таймаут фазы DIRECT
- conn_mgr_destroy до etcp_router_destroy (исправлен порядок)
- test_conn_mgr: +2 сценария (DB-успех, DB-недоступен), проверка topo_group
- etcp_router: SVC_ROUTE_HDR (+8B), ETCP_ROUTER_CONN/TRANSIT_QUEUE хеши расширены под group_id
- Все caller'ы (proxy, routing, conn_mgr, nat, chatgui, tests) обновлены
- topo_group: глобальный реестр TOPO_NODE по node_id, ref_count=0 при создании
- BGP-обмен активируется для всех групп (а не только дефолтной)
- Протокол: group_id добавлен в WITHDRAW/TABLE_REQ/TABLE_COMPLETE/ERR_GROUP_MISMATCH
- Per-connection коллбэки заменены на instance-level conn_status
- msg_transport полностью удалён из проекта
57/57 тестов
- Remove is_dm column from channels table (dm detection by member count)
- Rename member name column to userinfo — extensible json_flat format
- Add json_flat.c/h library for compact JSON serialization
- Fix join_sig message format: use ch_x25519+ch_ed25519 instead of channel_id string
- Remove name from join_msg body (now in userinfo via json_flat)
- Update chat_core, chat_sync, member_sync, db_manager to new format
- Add topo_strategy.txt — архитектурные заметки по топологии
- chat_core.c: dump node_addresses total, per-node counts, nodes lookup before addr query
- topo_group.c: log db path, rc, and db pointer after sqlite3_open
- topo_group.c: open {db_path}/chats.db instead of {db_path} — was opening a directory
- chat_core.c: remove inst->topo_sqlite_db = g_cc.db — keep topo_sqlite_db as separate
uTun-only connection without FULLMUTEX, avoiding contention with GUI reads
- topo_sqlite_db moved from TOPO_GROUPS to UTUN_INSTANCE (direct access)
- topo_groups_set_sqlite_db() removed
- chatgui: chat_sync_connect_node → chat_core_connect_auto (direct ETCP, no conn_mgr)
- chatgui: chat_core_connect_from_invite saves to SQLite → auto connect (no BGP)
- chatgui: removed _on_node_updated BGP callback from member_sync
- chatgui: removed conn_mgr_get_status from status dump
- chatgui: removed all conn_mgr.h and topo_group.h includes
- chatgui: CONN_MGR_ERR_* constants → CC_* in chat_core.h
- removed unused cc_parallel_* code, conn_state_str/conn_type_str helpers
- find_third_node: use nd->inst->connections instead of group->senders_list
- on_conn_up callback auto-calls trigger_checks (no BGP handshake needed)
- Remove group param from link_ready, request_check_all — nat_detection self-sufficient
- Remove trigger_checks + route_ping_cancel_for_conn from public API (internal only)
- topo_group.c: removed last nat_detection_trigger_checks call — completely decoupled
- Header: 4-line summary, no duplicate function list, 7 public functions
- Assign ETCP_ID_NAT_DETECTION = 0x02, etcp_bind in create, etcp_unbind in destroy
- nat_detection_receive_cbk: own packet dispatcher (PING_REQ/RESP, NAT_INFO/CHECK_REQ)
- 4 handle_* become static internal, send_nat_check_req stays static (dead code)
- Rename TOPO_* -> NATDET_*: all subcommands, structs, message types
- Remove all NAT/PING constants and structs from topo_group.h
- Remove dispatch lines and subcmd_name cases from topo_group_receive_cbk
- API: clear sections (lifecycle/internal service/control/test helpers)
- trigger_checks: marked with IMPORTANT note about call order (must be after add_to_senders)
- debug_ui.h: remove NDEBUG guard so GUI_ERROR works in Release builds
- invite_link.h/cpp: add error field to InviteData with specific failure reason
- joindialog: show exact decode error in QLabel instead of generic message
- chat_sync: implement invite connect flow (CHANNEL_INFO_REQ/RESP, JOIN, WELCOME)
- topo_node_sqlite: node/address table init and lookup
- utun_node: getInviteAddresses fallback from ETCP sockets
- minor fixes in mainwindow, chat_core, gui_bridge
- Add CreateGroupDialog with group name input
- Generate X25519+Ed25519 keypairs, random uint64 channel_id,
Ed25519 signature, write to DB via uasync thread
- chat_core_create_channel(): create msg table, topo_node_sqlite_channel_put()
- GUI_EVT_CHANNEL_UPDATED notification to reload channel list
- Per-category debug config: debug_level= + debug_categories= in [gui]
- Unified logging via debug_config: all threads write to same file/console
- debug_enable_console(1) to mirror file output to stderr
- DEBUG_LEVEL_DISABLED=-1: truly disable category, NONE=0 fallback to global
- Fix uasync_post under epoll: process_posted_tasks was never called
- Fix MainWindow constructor parameter ordering (dbPath vs debugFile)
- debug_ui.h: append mode ('a' instead of 'w')
- CHAT groups don't send subnets and skip route insert/delete
- Group type mismatch sends ERR_GROUP_MISMATCH to peer
- New topo_groups_create_group() public API for creating typed groups
- Renamed TOPO_BGP to TOPO_GROUP with topo_group_id (64bit)
- Added TOPO_GROUPS container (ll_queue group_list) in UTUN_INSTANCE
- Memory pools moved from TOPO_GROUP to TOPO_GROUPS (instance-level)
- Default group: TOPO_GROUP_UTUN = 0x8000000000000000
- topo_groups_get_default() searches by group_id, not just first entry
- All topo_bgp_* renamed to topo_group_*; function signatures updated
- Files: topo_bgp.h/c -> topo_group.h/c
- NODEINFO_MSG (protocol, packed): added flags byte + group_id field
- NODEINFO (memory): ref_count, linked list heads instead of inline arrays
- NODEINFO_ROUTES: separate struct with linked list subnet heads
- NODEINFO_Q: node*, routes*, tranzit_data*, hop_list* as separate mallocs
- 6 memory_pools in ROUTE_BGP for NI_* linked list items
- ni_list_count() universal counter via _ni_head cast
- nodeinfo_serialize/deserialize for protocol <-> memory conversion
- NODEINFO_FLAG_SEND_SUBNETS controls subnet data in protocol
- group_id defaults: utun=NODEINFO_GROUP_UTUN(1) with subnets
Fixes:
- deserialization: data+2 instead of data+sizeof(BGP_NODEINFO_PACKET)
- memset: start after ll_entry to preserve ll.size
- hop_src: subtract hop_count*8 to point at correct dynamic offset
- same-ver branch: remove_path(conn) instead of remove_path_by_hop(peer)
- double-free in route_bgp_remove_conn/process_withdraw
- conn_mgr_add_alien_node: rewritten for new structures
- all test files updated for new API
Root cause: when bgp->local_node was reallocated (changed=1), old route
entries remained with stale v_node_info pointing to freed memory. The freed
memory got reused by a BGP peer's NODEINFO_Q, causing route_lookup to return
wrong node_id (b3b2b1b0afaeadac instead of local), which then failed at
etcp_route_send with 'no BGP route' and dropped packets to 10.23.2.1.
Changes:
- route_node.c: route_delete(old) before u_free + route_insert(new) after alloc
- utun_instance.c: remove duplicate route_insert (now atomic inside function)
- route_bgp.c: route_delete before freeing old peer NODEINFO_Q
- route_lib.c: routes_overlap now rejects only exact prefix+network duplicates
- tests/Makefile.am: add route_lib.o to test_route6_lib
When own NODEINFO is reflected back from a peer, do not add it
to bgp->nodes. Only update bgp->local_node which is sent separately.
This prevents route duplication and the 'local node in learned list'
inconsistency.
- route_bgp_process_nodeinfo: record alternative paths even when NODEINFO
version hasn't changed (fixes nodes disappearing on link down despite
having other active links)
- route_bgp_process_withdraw: only remove node when all paths gone (ret==1)
- route_bgp_remove_conn: broadcast withdraw for each removed node with
correct wd_source
- Extract ETCP_INIT_REQUEST_PKT / ETCP_INIT_RESPONSE_PKT named structs
- Replace anonymous structs and manual offset parsing with typed struct access
- Add src_ipv4/src_port fields (V2) to INIT REQUEST for DIRECT detection
- Server compares reported client addr with observed src; match + public IP → NAT_TYPE_DIRECT
- Skip STUN NAT check for DIRECT links
- route_bgp: handle NAT_TYPE_DIRECT → NAT_VERIFIED_DIRECT in handle_nat_info
- Add ed25519_public_key[32] to NODEINFO struct for pubkey distribution
- Add ed25519_public_key[32] to ROUTE_BGP (derived from X25519 privkey at init)
- Add ROUTER_FLAG_SIGNED (0x08) to SVC_ROUTE_HDR flags byte
- router_send_one_flags: when is_signed, sign [hdr][payload] and append 64-byte sig
- etcp_router_recv_cb: verify Ed25519 signature when ROUTER_FLAG_SIGNED set
- New API: etcp_router_conn_send_signed()
- Drop signed packets if sender node not in routing table or no Ed25519 key
- 5 unit tests in test_etcp_router_unit.c covering OK/tampered/unknown/no-key/short
Evgeny